Skip to product information
1 of 4

Shibori Cochin Silk Lampshade

Shibori Cochin Silk Lampshade

Regular price £135.00 GBP
Regular price £270.00 GBP Sale price £135.00 GBP
Sale Sold out
Tax included. Shipping calculated at checkout.
Size

Hand dyed by artisans using an ancient technique developed in Japan known as shibori these shades are a unique design from Samarkand. Each one is slightly different providing an elegant and striking addition to any interior.

View full details

Need More information?

Dimensions and Fittings

Please see the below table for full lampshade dimensions and the fittings they come with. 

All duplex fittings require either a shade carrier for display on a lamp base or a pendant spider for a hanging ceiling display. All of the duplex fitting lampshades can also be converted to a US 'harp and finial' fitting using a 'raised spider'.

Please see our blog post on fixtures and fittings for a more detailed description.

Base Diameter

Top Diameter

Height

Fitting

15cm

9cm

12cm

Clip on or E27

18cm

10cm

14cm

Clip on

18cm Pendant

10cm

18cm

Pendant

18cm Short Pendant

10cm

15cm

Pendant

25cm

15cm

18cm

Fixed shade carrier (E27)

30cm

16cm

20cm

Fixed shade carrier (E27)

35cm

25cm

26cm

Duplex 

40cm

25cm

26cm

Duplex 

45cm

29cm

29cm

Duplex

50cm

33cm

33cm

Duplex 

60cm

38cm

36cm

Duplex

Material

Silk

Product Category

Our lampshades fall into two main categories. This lampshade is part of our collections.

Lampshades that are part of the repeatable collection can be made in any of the sizes stated under our 'Dimensions and Fittings' section. Therefore if the size you are looking for is not currently available, please do contact us to discuss your requirements.

Lampshades that are part of our vintage sari or kimono collections are 'one-of-a-kind' pieces. This means that they cannot be replicated and are only available in the sizes currently in stock. This is also applies to any of the products tagged as 'non-repeatable'.

Delivery

Free UK delivery for orders over £100. See our delivery policy for more information.

Items can be returned for a full refund if they're not right. See our returns page for more information.

Frequently Asked Questions

What size shade do I need?

The size of shade you need to fit an existing lamp base is often a subjective thing but there are a few guidelines you can follow. As a rough indicator the diameter of the lampshade should roughly equate to the height of the lamp base. If the lamp base is very tall and thin (as in a candlestick) you will probably want to ignore that measurement and choose a smaller shade. The size of the shade may also be dependent on the dimensions of the room. Tall ceilings and large rooms will obviously take proportionately larger shades.

We offer Empire style lampshades in 8 sizes:

  • 10cm for wall sconces and chandeliers
  • 15cm for wall sconces and chandeliers
  • 18cm (in both pendant and with candle clip)
  • 25cm for small or tall and thin table lamps
  • 30cm for small or tall and thin lamps
  • 35cm for average table lamps or overhead lights (with an adaptor)
  • 40cm for average table lamps or overhead lights (with an adaptor)
  • 50cm for large table lamps

If none of these sizes are suitable you can enquire about our Bespoke Service and have your shade made to fit!

What fitting do I need?

Our shades use a variety of fitting to attach to a lamp. You will find the fitting description of each of our shades on the product page by clicking on Dimensions & Fittings and you will need to check to see if the shade fitting style is suitable for the lamp you wish to attach it to. Below are the different fittings available:

  • Clip-On: For the smallest shades (10, 15 and some 18cm) the fitting is a simple ‘clip’ that fits directly onto the bulb. Two loops of wire grip the bulb so the shade sits around the bulb. These shades will fit on most bulb types but ideally onto a candle bulb. They are unlikely to fit onto the bent tube compact fluorescent bulbs.

  • 42mm Standard (E27): The standard method to fit a shade to a lamp is that of a hollow ring that slots over the top of the bulb holder on the lamp and is held in place by means of a threader ring that screws down onto the outside of the bulb holder. The ring comes in the standard European size of 42mm and we supply an inner adaptor ring to fit the standard UK fitting (29mm – BC/B22). If your lamp takes an E27 screw-in bulb you wont require the adaptor ring. All of our 25cm and 30cm shades comes with this fitting.

  • Duplex: Larger shades with a Duplex fitting do not have the ring built in, but require a carrier or a gimble. The carrier has a 42mm fitting at one end (to take an adaptor ring) that fixes to the bulb holder on the lamp and at the other a ridge that the shade sits on. Carriers come in several different heights to go with different height shades allowing you flexibility. Our 35cm,  40cm and  50cm shades come with a Duplex fitting. You can order a shade carrier to go with your shade – we stock carriers in sizes from 3.5" up to 9" and will fit lampshade carrier to your shade unless you contact us with a specific size requirement.

I have found the the perfect lampshade but you don't have the right size in stock! Can you help?

It depends on the range in which the lampshade has come from. The JaipurBagruAssam and Scallop collections are all repeatable lines so it is possible to have the correct size made for you (from the list of standard dimensions we offer found under the fixtures and fittings tab). If the lampshade you require is from the Vintage Sari or Kimono ranges, these are 'one-of-a-kind' shades made from non-repeatable fabrics so cannot be recreated. However, we do also offer a Bespoke service where we can help you find your perfect lampshade made from a selection of vintage sari fabrics we have here at Samarkand HQ. Please get in touch if this is something you are interested in!

I can’t find what I’m looking for on the website

We try to keep a good selection of our stock on the website – constantly updating it but we often can’t put everything up so if you’re looking for something specific do get in touch (email info@samarkanddesign.com) or give us a call (07973 922943) and we’ll try and help.

Can I order a shade to match a scheme?

We offer a bespoke service and will quote on a shade to your specification. We carry a large stock of saris, kimonos, block prints and ikats and will make suggestions according to your requirements.

Where can I see the lampshades for real?

We realise how difficult it is to order a lampshade on-line so we try to help as much as possible. We have stockists in London, Tetbury and Marlborough and we regularly exhibit at fairs. We also offer a consultancy service (available in London through to Devon).

I can't log in to see my orders

If you don't know your password or you didn't create an account when you placed your order you can gain access by resetting your password. If you didn't create an account it will be created by resetting your password as long as you specify the email address you used when you placed your order.

What payment methods do you accept?

Payment can be made using Visa, MasterCard or American Express cards. We also accept ShopPay and PayPal

How long should it take to receive my order?

If you are in the UK, you can expect to receive your order within 2 to 3 working days.  If it is especially urgent it is best to contact us and alert us to that.

Can I return any goods that aren't suitable?

Yes - you can return any items to us within 14 days of receipt as long as they are in the original packing and are undamaged.  We will arrange a full refund once we have received the items.

I am in the USA - can you provide lampshades to fit a harp and finial (US style) fitting?

Yes - we ship all over the world - it normally takes approx 5-7 days.  And all of our larger shades - 35cm or bigger come with a Duplex fitting which can be adapted to harp and finial by the use of a spider attachment. Unfortunately our smaller shades, 25cm and 30cm cannot be adapted.